FaceBook Twitter
   
Google+ YouTube

 

Mezzanine Goods Floor Lift, Manual Handling Solutions Goods Lift


Please use the tabs below to view our Mezzanine Goods Floor Lift portfolio
 

Why not let us call you back and discuss your requirements

 
Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk
  Manual Handling Solutions
 
Mezzanine Goods Floor Lift  
Typical overview of the Mezzanine floor lift: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 1500mm wide by 1250mm deep and will close down over the legs.......
     
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

The lift will be constructed using a single mast which must be bolted to the Mezzanine floor RSJ through the floor

The lift platform will measure approximately 1400mm wide by 1200mm deep and will close down over the legs

The clear working platform area will be 1340mm x 1140mm......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

The lift will be constructed using a single mast which must be bolted to the Mezzanine floor RSJ through the floor

The lift platform will measure approximately 1400mm wide by 1200mm deep and will close down over the legs

The clear working platform area will be 1340mm x 1140mm......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

CONTROLS - A control panel will be fitted on both the lower and upper floor.

SAFETY EDGE - There is a built in safety function in the safety frame. If the Safety Frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

Typical overview of the Mezzanine floor lifter: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 2140mm wide by 1540mm deep and will close down over the legs. The platform will feature 1100mm high rails on all sides and a double outwards opening gate. The gates will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

Typical overview of the Mezzanine Goods lifter: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 1500mm wide by 1500mm deep and will close down over the legs. The platform will feature 1100mm high rails on all sides and a single outwards opening gate on the right-hand side of the mast. The gate will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

The Manual Handling Solutions Mezz Lift is a robust and versatile platform lift for handling all sorts of loads up to approx 750kg safely and efficiently between floors such as ground floor and mezzanine level. It offers users a cost effective solution to comply with Manual Handling Regulations and reduce the risk of injury to employees......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

The Mezz Lift is a robust and versatile platform lift for handling loads up to 300kg safely and efficiently. It offers users a cost effective way to comply with manual handling regulations and reduce the risk of injury to employees. The entire handling process can be undertaken by a single person without any manual lifting to promote safety and productivity. A unique hold-to-run system promotes safety by stopping the lift whenever the control lever is released.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

Control points will be mounted at both the ground and mezzanine levels attached to the guarding. Both control points will feature latching control buttons; Raise, Lower & E-stop SAFETY TRIP BAR Aluminium safety frame with built in safety function.

If the safety frame is touched on its way down, the Lift stops immediately. To continue lowering, the table has to be raised a little to be able to lower again. MAINTENANCE Standard safety legs are provided to support the scissor lift mechanism in the raised position and must be deployed for all servicing and maintenance work......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Floor Lift  

The lift platform will measure approximately 1350mm wide by 1250mm deep and will close down over the legs of the masts

The clear working platform area will be 1290mm x 1130mm ......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Floor Lift  

2 x controls (located at ground and 1st floor levels) UP & DOWN latching hand control units with EMERGENCY STOP button and 4 meter long cable

1100mm high handrails to both long sides and 1 short side Single outward opening gate on other short side, electrically interlocked type 1 ......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Floor Lift  

We offer scissor lift which has a 1300mm x 800mm lift platform size, which will have a 1200mm x 720mm usable area, narrowing to approx. 650mm width through the drop down barrier.

1000Kgs capacity as standard, but would be de-rated to 500Kgs when handling goods.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Floor Goods Lift  

The lift is to be positioned on the end of the racking so will be no wider than 800mm. The platform size will be 450mm x 850mm (loading onto the 450mm side) and will dock at around 900mm from the floor at both levels. There will be a slam shut, single gate at both levels as demonstrated in the attached drawing.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Floor Goods Lift  

The lift will be supplied with a full height enclosure on all sides, measuring approximately 1830mm deep, 1910mm wide and 6900mm high overall. The enclosure will feature single gates on side B at both levels; 2200mm high on the ground floor and 1100mm high on the first floor. All gates will be fitted with an electrical/mechanical interlock to prevent opening when the lift is not parked.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

Table will be supplied with a remote power pack for ease of change over, should a fault occur. A spare power pack will also be provided.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

Goods Lift, with maximum working load 500kg, fully enclosed in a self supporting mesh shaft. The platform will be increased to 1350mm x 1600mm to accommodate clients request for loading a pallet or 4 trolleys.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

Goods Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. The lift will have three stops; ground, first tier mezzanine and second tier mezzanine. At each level the entrance to the lift will be via 2000mm clear high gates fitted with electrical interlocks which will prevent the gates from being opened unless the platform is docked at the appropriate level.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezzanine Goods Floor Lift  

1100mm high mild steel handrails complete with mid rail and 150mm high kick plates suitable for mounting along both long sides of the scissor lift platform by the contracted installer. One short end to be fitted with a simple drop down barrier with micro stop/go switch.......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Mezz Lift Goods Lift  

Mezz Lift Goods Lift , with maximum working load 250kg which is to be fixed back to the existing side wall, guarded two sides at the lower level and three sides at the upper level. The platform size will be 800mm x 1000mm, guarded three sides to suit loading on and off the same side........

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Goods Lift at Prada Bicester Village  

Scissor Table style Goods Lift designed and installed at Bicester Village for Prada. Manual Handling Solutions were approached by Gregori Chiarotti Architects in offering a solution for the delivery of Goods to the Prada store at Bicester Village......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
250kg Mezz Lift for Eat Natural, Halstead, Essex  

Mezz Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. The platform will be 1650mm x 850mm to allow two trolleys to be transported at the same time.

Additional feature
The Mezz Lift will be fitted with a fall arrest block on to the platform, independent of the existing chains which would hold the platform in place in the event of a catastrophic failure......

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
250kg Mezz Lift for Eat Natural, Halstead, Essex  
The platform will be 1200mm x 1550mm to suit a single trolley or a pallet and will be guarded 2000mm high to suit the loading direction. At the entrance to the lift at each level there will be 2300mm clear height gates which will be fitted with electrical interlocks to prevent the gates from being opened unless the platform is docked at the appropriate level......
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Goods Lift for Barony Universal Products plc, Goods Lift by Manual Handling Solutions Goods Lift  

3 Stop Goods Lift with a total raised height of 4170mm and a lift capacity of 1500kg Platform is Anti Skid checker plate with a platform size 1650mm x 1350mm however the addition of the platform mounted guard rail will reduce the useable platform size by approximately 25 mm on each side. This will result in a useable platform size of 1600 mm wide x 1300 mm depth

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Waist Height Mezz Lift - Deben UK Ltd  

Platform size 1000mm x 800mm, the platform will finish 800mm higher than finished floor level at both landings to assist loading and unloading by hand. At the lower level there will be a 2000mm high slam shut twin gates, while at the upper level there will be a fixed panel up to 800mm high with slam shut twin gats above.th

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
200kg Mezz Lift for Central Presentations, Kenilworth  

200kg Goods Lift, with a lift height of 2740mm maximum working load 200kg. the lift is fully enclosed in a self supported mesh shaft. The platform size will be 850mm x 1750mm to suit all trolley sizes, but to accommodate this platform size the capacity will have to be limited to 200kg.

A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run push button station adjacent to the gates at both levels.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 

Goods Lift installed at Ultra Electronics (Weymouth) by Manual Handling Solutions

The Goods Lift will be constructed using a single mast which will be self supporting bolted to the floor. Lift Height 4110mm, lift platform will measure approximately 1210mm wide by 1620mm deep and will close down over the legs flush with the floor.

The clear working platform area will be 1420mm x 1210mm. A fully supporting lift structure, manufactured from box section steel with double side-hinged loading gates at each level.

The gates are fitted with a heavy duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed.

Low voltage ‘dead man’ push buttons fitted with key lock and emergency stop at each level. Electrics 3 phase, 415v, 50Hz, 3.0Kw.

Maximum lift capacity will be 1000Kg
 
Goods Lift Installed at Ultra Electronics Weymouth.pdf
Ultra Electronics Goods Lift Drawing.pdf

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift installed at RAF Menwith Hill  

50kg Goods Lift installed at RAF Menwith Hill, Harrogate, North Yorkshire

Mast type Mezzanine Goods Lift to be installed alongside a mezzanine floor from Manual Handling Solutions

The Mezzanine Goods Lift will be constructed using a single mast which will be supported by the mezzanine floor structure and a steel framework bolted to the floor. The lift platform will measure approximately 1450mm wide by 1200mm deep and will close down over the legs. The clear working platform area will be 1390mm x 1140mm. The overall plan size of the lift will be approx 1450mm wide x 1450mm deep.
 
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
The platform will feature 1100mm high rails on all sides and a single outwards opening gate on side A. The gate will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open. The platform will close to the floor with a 60mm lowered height and have a total raised height of 2565mm. At the top level, the lift height will be governed by a limit switch system to ensure that the platform parks with the floor. The platform will be supplied with a loading ramp, 1450mm wide by 600mm long. The hydraulic power pack will be mounted to the mast and electrical system will be housed in a separate wall mounted box at ground level. Control points will be positioned at both levels. All points will feature latching call buttons and emergency stop controls. Power requirement for the lift: 415V 3 phase + Neutral via 16amp isolator (Supplied by customer) Motor specification: 0.8Kw 3phase 415V with 3ltr reservoir. Maximum lift capacity will be 50Kg
Goods Lift Installed at RAF Menwith Hill, North Yorkshire.pdf
Mezzanine Goods Lift Drawing ref RAF Menwith Hill.pdf
Comma Oil Single Pallet Goods Lift 500 kg Capacity  

This Goods lift will be constructed using a single mast which will be supported by the mezzanine floor structure as well as a framework mounted at ground level. The lift platform will measure approximately 1500mm wide by 1500mm deep and will close down over the legs.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Comma Oil Double Pallet Goods Lift 500 kg Capacity  
Mezz Lift - Goods Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. Lift height floor to floor 3240mm. The platform would be 1000mm x 1000mm to suit the trolleys to be loaded and would be guarded 900mm high to suit the loading direction. .
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
DRS Mezz Lift - Goods Lift 250kg by Manual Handling Solutions  
This Goods lift will be constructed using a single mast which will be supported by the mezzanine floor structure as well as a framework mounted at ground level. The lift platform will measure approximately 2700mm wide by 1500mm deep and will close down over the legs.
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 
MezzLift, with maximum working load 500kg, fully enclosed in a self supporting mesh shaft. Lift Height Floor to Floor 3100mm, the platform will be 1000mm by 1350mm to suit the size of Server Racks being transported and will be guarded three sides to suit the loading direction. At the entrance to the Mezz Lift at both levels there will be 2500mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level. s.
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

Bespoke 500kg Mast Design Goods Lift with a raised height 3100mm (2 stops) Platform size 2900mm x 1000mm (800mm usable) to accommodate large profile cutting dies. Platform Material Anti skid checker plate to include mesh frame down both sides of the platform. The lift will be surface mounted fitted with drop down ramps (Bridging Plate) at each end. Operation is Electro-hydraulic with Electrics 3 phase, 415v, 50Hz, 3.0Kw.


  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

3 Stop Bespoke Goods Lift with a total raised height of 3240mm and a lift capacity of 1500kg. Platform is Anti Skid checker plate with a platform size 2500mm x 2000mm.

Operation is by Electro-hydraulic, Electrics 3 phase, 415v, 50Hz, 3.0Kw, Controls Low Voltage automatic pulse press to go’ push buttons fitted with key lock and emergency stop at each level
Total weight; 1,500 kgs approx.


  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 
Goods Lift, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. The platform size will be 1300mm x 1100mm a standard pallet or other items and will be guarded 900m high to two sides to suit the load direction. At the entrance to the lift at both levels there will be 2000mm high gates which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level. A small fixed ramp will be provided at the lower level to assist loading on to the 50mm deep platfor

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

2 Stop Bespoke Goods Lift with a total raised height of 4525mm and a lift capacity of 500kg. Platform is fitted with Anti-Skid checker plate with a platform size 4000mm x 2000mm.


  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

Bed Lift with a SWL of 250kg designed to allow engineers to carry out maintenance work safely on various types of hospital beds.

Static Mast Lift with adjustable forged class 2A forks

  • Closed Height 80mm
  • Raised Height 2049mm
  • Unit to be bolted to floor and wall
  • 240V AC with 2m lead and blue industrial plug


  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

Bay Lift, with maximum working load 1000kg, mounted to the existing loading dock. The maximum platform width is 2450mm, due to the length of planks, and there will be a depth of 1370mm. There will be a folding toe on to the short side to assist loading on to the 45mm deep platform

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Goods Lift by Manual Handling Solutions  
Goods Lift with a total raised height of 3585mm and a lift capacity of 1000kg. Platform is Anti Skid checker plate with a platform size 3000mm x 1400mm
At ground level the self-supporting structure is fitted with 2200mm High Saloon Style Gates

The upper level self-supporting structure is fitted with 2 x 2200mm Single Opening Gates. 

 

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 

Goods Lift One Stop Shop in Wakefield

Goods Lift One Stop Shop in Wakefield (3) Goods Lift in Fire Enclosure at Lower Level Goods Lift One Stop Shop in Wakefield (2)
One Stop Shop Goods Lift Drawing (1).pdf
One Stop Shop Goods Lift Drawing (2).pdf
 
Goods Lift for One Stop Shop, Wakefield
Bespoke Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft with a Lift Height 2595mm
The platform will be a maximum size of 1400mm x 840mm and guarded 900mm high on 3 sides infield to suit the loading entry and exit on the same side. Platform will also have a drop down barrier to restrict trolleys from rolling forward.
A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level.
 
Control is via a hold to run control station adjacent to the gates at both levels.
 
Included is a 12 months Statutory Inspection and maintenance this ensures continued safe and reliable use of the equipment and full compliance with current legislation.  In brief it comprises an annual service with thorough examination and test, a six-month inspection and test and all labour or callout charges.
 
Goods Lift is enclosed in a fireproof enclosure at lower level only (Supplied by others)
 
Delivery and installation
One Stop Shop
47 – 51 Bradford Road
St John`s
Wakefield
WF1 2AA

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift High Rise 1000kg capacity  
Goods Lift with a total raised height of 11,543mm and a lift capacity of 1000kg. Lift is recessed in a 110mm pit constructed by the client. Platform surface has Anti-Skid checker plate with a platform size 2720mm x 1720mm (Usable 1,515mm)
At both levels the self-supporting structure is fitted with 2 x 2200mm Saloon Opening Gates. Each gate is fitted with Heavy Duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed.
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Galvanised Goods Lift installed and commission 2000kg for a frozen food company in Norfolk  
Goods Lift Hot Galvanised with a total raised height of 6550mm and a lift capacity of 2000kg. Platform is Anti-Skid Galvanised checker plate with a usable platform size 1550mm x 1530mm. Platform fitted with Shot Bolts as standard engaging at upper level when the lift parks. Additional protection/load positioning 
At ground level the self-supporting structure is fitted with 2200mm High Saloon Style Gates. The upper level is integrated with the roller shutter loading doors and traffic light system. The roller shutter door with not open until the lift platform is docked
 
 
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
Goods Lift - Waist Height – Hand Loaded, with a lift Capacity 250kg SWL  
Goods Lift, with maximum working load 250kg, fully enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 700mm and guarded two sides to suit the loading direction, the platform will back 800mm high from floor height at both levels to assist loading by hand. At the entrance to the lift at the lower level there will be a 2000mm clear height gates while at the upper level there will be an 800mm high fixed frame with a slam shut gate above this. The gates will be interlocked with a monitored electric strike to prevent the gates from being opened unless the platform is docked at the appropriate level.
  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

Self supporting structure requiring only floor fixing for the mast and enclosure

The hydraulic power pack and electrical system mounted to the mast

Control points are positioned on the rear of the mast at the lower level and on the enclosure side at the upper level (Additional control points are available as an option).

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

Self supporting structure requiring only floor fixing for the mast and enclosure

The hydraulic power pack and electrical system mounted to the mast

Control points are positioned on the rear of the mast at the lower level and on the enclosure side at the upper level (Additional control points are available as an option)

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

Cellar Lift with a raised height 3050mm, A fixed 3mm platform plate will be supplied, the size to be 830mm x 765mm. The fixing support plate will allow for adjustment of 37mm up or down to allow for a fluctuation in the finished floor height. Platform to be fitted with Roller Conveyor supplied and fitted by client height being 85mm.Roller conveyor to extend 20mm above the mast to allow for products to pass over the mast onto an adjoining conveyor.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

At the entrance to the lift at both levels there will be 2250mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

A 2.2kw, 415 volt, three-phase and neutral supply is required terminated in an isolator at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

MezzLift, Goods Lift with Twin Mast, with maximum working load 300kg - Lift Height 5430mm enclosed in a self-supporting mesh shaft. The platform will be 1800mm x 1800mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2500mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 500mm long fixed ramp will be provided to assist loading on to the 50mm deep platform

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 
 

1100mm high mild steel handrails complete with mid rail and 150mm high kick plates suitable for mounting along one long side and one short end of the scissor lift platform.  The remaining short end will be fitted with a single outward opening hinged gate complete with electrical switch.

The platform will be fitted with a tread plate finish for improved grip in wet/dusty conditions

Installation will include securing down of lift, fitting of ancillary items, connection of mains power and all electrical systems, testing and commissioning of overall installation.  Please see below for exclusions

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 

Goods Lift, with maximum working load 200kg, fully enclosed in a self- supporting mesh shaft. The platform will be 900mm x 1550mm to suit a single trolley or a pallet and will be guarded 2000mm high to suit the loading direction. At the entrance to the lift at each level there will be 2300mm clear height gates which will be fitted with electrical interlocks to prevent the gates from being opened unless the platform is docked at the appropriate level. At the lower level there will be a small fixed ramp to assist loading on to the 50mm deep platform.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 

Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. The platform will be 1480mm x 1680mm and guarded 900mm high on the non-loading edges. Lift height 3460mm

At the entrance to the lift at both levels there will be 2200mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 

Goods Lift, with maximum working load 250kg, 3850mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 1300mm x 1100mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift, Bespoke Goods Lifts, Mezzanine Floor Lifts in Devon  

Bespoke Goods Lift, with maximum working load 250kg, 3150mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 1300mm x 1100mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift - Goods Lift, Goods Lifts, Mezzanine Floor Goods Lift From MHS.COM LTD  
Goods Lift, with maximum working load 250kg Double Mast, 3040mm Floor to Floor Height enclosed in a self- supporting mesh shaft.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift, Mezz Lift, Passenger Lifts, Platform Lifts, East Anglia, Norfolk  
Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Floor to Floor Height 3200mm.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift, Goods Lifts by Manual Handling Solutions  
Goods Lift, through floor with maximum working load 450kg, enclosed in a self-supporting mesh shaft.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

Goods Lift, Goods Lifts, Mezzanine Floor Goods Lift  
The platform will be 1900mm x 1100mm and guarded 900mm high on the non-loading edges.

.

  Mezzanine Goods Floor Lift Next...
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website

www.manualhandlingsolutions.co.uk

 

Product Downloads

MHS Solutions Range.pdf

Mezzanine Floor Lifter.pdf

 
 

Contact us on Tel 01553 811977 / Fax 01553 811004 or email us at sales@manualhandlingsolutions.co.uk

Contact us